swisswaffen.com

Swiss Schmidt-Rubin Straight-Pull Rifle Database

The Daniel Defense DDM4 Hunter is Daniel Defense's premium hunting and precision carbine: 18" mid-length barrel in 5.56 NATO, factory-installed Geissele SSA (Super Semi-Automatic) 2-stage trigger, MFR 15.0 M-LOK handguard, ambidextrous Daniel Defense GRIP-N-RIP charging handle, ambi safety, and exclusive Kryptek Highlander finish. An AR-15 designed for the demanding sport shooter and modern hunter, with a level of equipment rare at this price point.

The 18" length is ideal for the balance of precision, handling, and velocity in 5.56 NATO:

• Maximum velocity without the weight of a 20". Full ballistic potential extracted.
• Mid-length gas system — softer cycling, less alignment disruption, more reliable extraction, reduced wear vs carbine-length.
• Maximum precision for medium/long-range shooting (up to 500+ m depending on ammunition).
• Minimal recoil thanks to length and mid-length system.

The barrel uses Daniel Defense's proprietary S2W (Strength-to-Weight) profile, Chrome Moly Vanadium Cold Hammer Forged, chrome-lined. Heavy phosphate mil-spec exterior treatment. Each barrel is HP/MPI tested. 1:7" twist for full compatibility with modern 5.56 projectiles (55 gr to 77 gr and beyond).

The DDM4 Hunter ships with the legendary Geissele Super Semi-Automatic (SSA) 2-stage trigger factory-installed — one of the best AR-15 triggers on the market: soft first-stage (~2.5 lb), clean predictable wall for the break (~4.5 lb), short positive reset for rapid follow-up shots. Used by American elite shooters and snipers (SSA-E variant in special units). Standalone value ~USD 240 in the US — a significant aftermarket investment saved.

The Kryptek Highlander is the signature camouflage finish of the Hunter: mountain / rock / vegetation pattern inspired by the Highlands, developed by Kryptek Outdoor Group. It is one of the most recognized tactical camouflages worldwide, applied in Cerakote for effective camouflage in rocky, semi-open, and mountainous terrain, superior corrosion and abrasion protection, UV resistance, and a premium distinctive look — rare and exclusive configuration in the Daniel Defense range.

The Daniel Defense MFR 15.0 is a 15" long handguard covering the barrel almost entirely to the gas block. M-LOK on 3 sides, continuous 1913 Picatinny rail on top, free-float design, proprietary Daniel Defense 4- or 6-bolt attachment, CNC 6061-T6 aluminum, Type III anodized — here in Kryptek Highlander finish. Large space for bipod, laser range finder, light, QD sling, varied grip positions.

The Hunter is equipped with the Daniel Defense GRIP-N-RIP, the brand's premium ambidextrous charging handle: extended ambi (right or left-handed without modification), reinforced latch, CNC 7075-T6 aluminum body, CNC 6061-T6 handles and latch, heavy stainless steel roll pins, Type III hard-coat anodized. 

• Ambidextrous safety selector.
• GRIP-N-RIP ambidextrous charging handle.
• Integrated rear QD point on the lower.
• Integrated QD point on the stock.

• Caliber: 5.56 x 45 NATO (compatible .223 Remington)
• Type: semi-automatic AR-15 carbine — hunting and precision configuration
• Barrel length: 18" (457 mm)
• Barrel profile: S2W proprietary Daniel Defense
• Barrel material: Chrome Moly Vanadium steel, Cold Hammer Forged, chrome-lined
• Barrel treatment: heavy phosphate mil-spec, HP/MPI tested
• Twist rate: 1:7"
• Muzzle thread: 1/2 x 28 TPI (standard 5.56 thread)
• Muzzle device: Knurled thread protector (12L14 steel, salt bath nitride) — removable for suppressor or muzzle device installation
• Gas system: mid-length, direct impingement
• Gas block: pinned low profile, 4140 steel, heavy phosphate
• Upper receiver: Mil-Spec, CNC 7075-T6, Type III hard-coat anodized
• Lower receiver: Mil-Spec, CNC 7075-T6, Type III hard-coat anodized
• Safety: ambidextrous
• Charging handle: Daniel Defense GRIP-N-RIP ambidextrous
• Trigger: Geissele Super Semi-Automatic (SSA) 2-stage
• Handguard: Daniel Defense MFR 15.0 M-LOK, free-float, CNC 6061-T6
• BCG: M16 profile, chrome-lined, MP tested, properly staked gas key
• Buffer: H Buffer
• Stock tube: Mil-Spec 6-position, 7075-T6 aluminum
• Stock: Daniel Defense Buttstock with non-slip cheek weld, interchangeable butt pads, integral QD
• Pistol grip: Daniel Defense Pistol Grip, glass-filled polymer, soft-touch overmolding
• Sights: not included
• Overall length: 848 – 940 mm (33 3/8" – 37") with muzzle device
• Weight: 3.18 kg (7.0 lb) without magazine
• Finish: Kryptek Highlander (exclusive Cerakote camouflage)
• Made in: USA, Black Creek (Georgia)

• Factory-installed Geissele SSA 2-stage trigger — significant aftermarket savings.
• 18" S2W mid-length barrel — reference length for 5.56 precision + velocity + handling.
• Exclusive Kryptek Highlander finish — unique in the DD range.
• Premium GRIP-N-RIP ambidextrous charging handle.
• Complete ambi ergonomics (safety + charging handle).
• MFR 15.0 M-LOK handguard — large accessory platform.
• Free-floating barrel + Geissele + 18" HP/MPI barrel = optimal precision package.
• 1/2 x 28 standard thread — compatible with most 5.56 suppressors.

• Precision sport shooting — 3-gun long-distance, DMR-style matches, 100-500 m field shooting.
• Small game and predator hunting — coyote, fox, crow, wild boar depending on cantonal regulations.
• Stand hunting in mountainous terrain — Kryptek Highlander camo specifically designed for this use.
• 5.56 suppressor platform — removable thread protector, standard 1/2 x 28 thread.
• Dynamic sport shooting with magnified optic.
• Tactical collection — distinctive Kryptek Highlander piece.

Helvetia Defense offers several Daniel Defense configurations oriented toward precision and long-distance versatility: DDM4 Hunter (18" Kryptek Highlander) — precision + hunting + exclusive camo + Geissele SSA, DDM4 V7 Pro (18" M-LOK Geissele SD-E) — pure sport precision, and DDM4 MK12 SPR (18" stainless DLC) — mil-inspired Special Purpose Rifle. The Hunter stands out with its versatile hunting/precision vocation and its Kryptek Highlander camouflage unique in the DD range.

• 1 x Daniel Defense DDM4 Hunter 18" 5.56 NATO Kryptek Highlander rifle
• 1 x DD Magazine 32 rounds (32 rds)
• 1 x thread protector (factory-installed)
• 1 x Full-Latch Impact hard case
• 1 x case lock
• 1 x chamber flag
• DDM4 user manual
• HP/MPI test certificate