Advertisement:
|
|
Advertisement:
|
| Status: | active |
| Date: | 09.06.2026 |
| Event: | Webseite http://www.egun.de, eGun GmbH Deutschland |
| Availability: |  ended, not sold |
| Article no.: | 20398533 |
| Seller: | HornerArms |
| Title: | HB Ind. HS/Springfield Kuna 1913 Stock Adapter |
| URL: | https://egun.de/market/item.php?id=20398533 |
| Price: | EUR | 118.00 | ||
|
| Description: |
| Hinterschaftadapter von HB Ind. mit 1913/Picatinny Schnittstelle für die HS/Springfield Kuna Ermöglicht die Montage von Alternativen Hinterschäften mit der 1913/Picatinny Schnittstelle, z.b. Magpul UCS Hersteller-Info: 1913/Picatinny/Sig type stock or arm brace adapter for your Springfield Kuna. Our aluminum mount features an integrated QD socket and directly replaces the factory polymer mount. Our mount is machined from billet 6061T6 aluminum and hard coat anodized to MIL-A-8625. Note: Due to typical production tolerances in the Kuna receiver geometry, your rear takedown pin could fit more tightly with our adapter than with the factory adapter. The factory adapters are polymer, which is a more flexible material, and can account for a wider range of hole locations. Our adapters are aluminum, which is a more rigid material, and therefore have a smaller range in which the takedown pin can be a true “slip fit”. Because of this, we designed our mating geometry to favor the tight side of the tolerance zone, guaranteeing that our adapters will always fall between a slip-fit and tight-fit condition; never too loose. Ultimately, and depending on your receiver, you might need to use a rubber mallet or punch to install/remove your rear takedown pin (nothing more). We believe the risk of being tighter and potentially needing a punch to better than the possibility of your adapter fitting loosely/wobble with a stock/brace attached. 1913/Picatinny/Sig Type Stock/Brace adapter for Springfield Kuna (HS Produkt) Integrated QD Socket for Convenient Sling Mounting Allows for use of all 1913 Type Braces and Stocks Drop In, No Additional Parts or Hardware Needed Machined Aluminum 6061-T6 Anodized MIL-A-8625 Type 3 Hard Coat Designed and Manufactured completely in USA. |
| Source: eGun GmbH Deutschland (http://www.egun.de) |
| Disclaimer Market Monitoring The displayed data of the market monitoring (i.e. advertisements, auction data, etc.) come from the respective website or auction catalog specified in the source. These are ongoing or, in most cases, expired offers. Swisswaffen.com is by no means the seller of the articles. There is also no connection between Swisswaffen.com and the effective seller. Click on the URL listed under "URL" to check if an item is still available. More information: No sales on swisswaffen.com! All data are without guarantee. |
Copyright 2013-2026 swisswaffen.com, Contact.
Source: specialized literary, particularly 'Bewaffnung und Ausrüstung der Schweizer Armee seit 1817, Bände 3 und 4', 'Die Repetiergewehre der Schweiz, Christian Reinhart, Kurt Sallaz, Michael am Rhyn, Verlag Stocker-Schmid' and 'Schweizer Militärgewehre Hinterladung 1860 - 1990, Ernst Grenacher'
The information and data provided on swisswaffen.com (and the corresponding other domain names) are for general and informational purposes only. Swisswaffen.com tries to keep the information up to date and correct, but we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information and/or any use of information is therefore strictly at your own risk.
Through this website you are able to link to other websites which are not under the control of swisswaffen.com. We have no control over the nature, content and availability of those sites. The inclusion of any links does not necessarily imply a recommendation or endorse the views expressed within them.
swisswaffen.com is run under Swiss law.
Privacy Policy
